Getting connected with OS8.x/iMac

To make a PPP connection via the Remote Access control panel follow the instructions below.

If you'll be using the Internet Setup Assistant, Click here.

1. Open the Modem control panel.
2. Make sure the port is set to the Internal Modem at the top of the window next to Connect via.
3. Select the iMac Internal 56k modem for the Modem pop up menu.
4. Elect sound on or off and the proper type of Dialing. ( tone or pulse)
5. Open the TCP/IP control panel and select PPP in the Connect Via pop up menu.
6. Select the type of IP addressing to using PPP server in the Configure pop up menu.
7. Enter the Name Server Address 207.221.169.33 and the Search Domain angstrom.net.
8. Open the Remote Access control panel. Enter your user name, password and dial up phone number, 412-209-0305.

At this point you should be able to connect using the Connect button in the Remote Access control panel. If there are any problems, try opening the AppleTalk control panel and set the Connect Via choice to Remote Only and try connecting again. If it still fails to connect, call the Angstrom support line for further troubleshooting. (412) 688-8844.